 |
The automated shot blasting machine simplifies the blasting process for wheel cleaning and finishing, features significantly quick and thorough to remove dirts, rusts, or old paintings comparing with sandblasting machine. As well, shot blaster gives an alloy wheel surface a roughness for good adhesion that will get perfect powder coating or painting application.
Wheel Shot blasting machine works through a high-speed rotating impeller to throw out steel shots in high speed and high flow, thus creates more forceful impact to wheel surface, The alloy wheel is placed in the chamber where the process is fully automatic and can be controlled by a timer. Each finishing circle allows one piece alloy wheel blasted but only takes 3-5 minutes.
Blasting Chamber
The specially designed blasting chamber for holding alloy wheel consists protetive bracket, and 2 rollers for continuous wheel rolling, ensures thorough cleaning and cleaning.
Impeller head: 1set
The head is designed for complete shot blasting of the wheel to be cleaned, and minimize the empty throw of the steel shot on the basis of covering all the wheels to be cleaned.
Elevator: 1set
The elevator works through a belt that scraping the wasted blasting shots at the bottom of the elevator, then feeds the shots to the top driven by the elevator motor. Finally under the centrifugal gravity the shots drops to the separator.
Filter Dust Collector: 1 Set
It uses new advanced filter material that dust can not penetrate into the interior of the filter material, features ow resistance and easy cleaning. Dust removal efficiency is up to 99.5%.
Air flow:6800m3/h
Fan motor power:7.5KW
PLC Electric Control: 1Set
PLC control with touching panel is convenient for debugging. The operator can start each functional component in sequence, or jog the individual functional components out of order to test the performance and operation status.
| Working Chamber Size | L1300*W1300*H780mm |
| Footprint Size | L1720*W3658*H2265mm |
| Suitable wheel size: | Diameter700mm * Thickness500mm (Or smaller) |
| Control System | PLC |
| Rotating Speed of Rollers: | Adjustable |
| Shot Blasting Speed | Adjustable |
| Dust Collector Type: | Anti-flame filters |
| Power Supply: | Electric |
Impeller head power: | 7.5KW |
| Fan motor power: | 2.2KW |
| Shot drive power: | 1.5KW |
| Elevator system power: | 2.2KW |
The automated shot blasting machine simplifies the blasting process for wheel cleaning and finishing, features significantly quick and thorough to remove dirts, rusts, or old paintings comparing with sandblasting machine. As well, shot blaster gives an alloy wheel surface a roughness for good adhesion that will get perfect powder coating or painting application.
Wheel Shot blasting machine works through a high-speed rotating impeller to throw out steel shots in high speed and high flow, thus creates more forceful impact to wheel surface, The alloy wheel is placed in the chamber where the process is fully automatic and can be controlled by a timer. Each finishing circle allows one piece alloy wheel blasted but only takes 3-5 minutes.
Blasting Chamber
The specially designed blasting chamber for holding alloy wheel consists protetive bracket, and 2 rollers for continuous wheel rolling, ensures thorough cleaning and cleaning.
Impeller head: 1set
The head is designed for complete shot blasting of the wheel to be cleaned, and minimize the empty throw of the steel shot on the basis of covering all the wheels to be cleaned.
Elevator: 1set
The elevator works through a belt that scraping the wasted blasting shots at the bottom of the elevator, then feeds the shots to the top driven by the elevator motor. Finally under the centrifugal gravity the shots drops to the separator.
Filter Dust Collector: 1 Set
It uses new advanced filter material that dust can not penetrate into the interior of the filter material, features ow resistance and easy cleaning. Dust removal efficiency is up to 99.5%.
Air flow:6800m3/h
Fan motor power:7.5KW
PLC Electric Control: 1Set
PLC control with touching panel is convenient for debugging. The operator can start each functional component in sequence, or jog the individual functional components out of order to test the performance and operation status.
| Working Chamber Size | L1300*W1300*H780mm |
| Footprint Size | L1720*W3658*H2265mm |
| Suitable wheel size: | Diameter700mm * Thickness500mm (Or smaller) |
| Control System | PLC |
| Rotating Speed of Rollers: | Adjustable |
| Shot Blasting Speed | Adjustable |
| Dust Collector Type: | Anti-flame filters |
| Power Supply: | Electric |
Impeller head power: | 7.5KW |
| Fan motor power: | 2.2KW |
| Shot drive power: | 1.5KW |
| Elevator system power: | 2.2KW |
