INDUSTRIAL POWDER COATING FAQS AND EQUIPMENT GUIDANCE

Powder coating is an excellent solution for protecting and enhancing the appearance of outdoor metal furniture.

Powder coating requires a spray booth for several important reasons:Containment of Overspray: Powder coating involves spraying fine particles of powder onto a surface. A spray booth contains the overspray, preventing it from spreading into the surrounding environment. This helps maintain a clean wor

A Teflon coating oven is a specialized industrial oven used to cure Teflon (PTFE or related fluoropolymer) coatings onto metal or other substrates. These ovens are designed to heat the coated materials to specific high temperatures, allowing the Teflon powder or liquid coating to melt, flow, and fo

The reciprocator is one of the important section in automatic powder coating line. Each reciprocator carrries a certain quantity of automatic spray guns that coats parts efficiently and uniformly.

Whether you are a manufacturer, coatings job shop, a common question that is asked is how much will it cost to start powder coating.

Manufacturers looking to improve painting operations for parts of all sizes and shapes are turning to advanced robotic technology to increase finishing quality, consistency and throughput, while dramatically lowering operating costs and decreasing wasted material and hazardous environments for human

As we know, there's two types of cyclone powder recovery systems configured for automatic powder coating booth, which are mono-cyclone and multi-cyclone systems, but I believe there's some people do not know how to choose, this artical gonna give you some clues.

Some people find their powder coating booth drift out of powders from the opening of the spray booth,there are some reasons that can cause this problem,you can find the solutions refer to the below reasons according to your booth situations:Possible Causes 1:Not enough containment air flowing throug

The COLO-191S and COLO-800D powder coating machine are two hot-selling models, they have obvious differences that suis for different powder coating requirements.

The kV adjustment changes the amount of voltage charging the powder particles as they pass through the gun. The higher the setting, the stronger the charge. High settings are great for flat panels and the outside of box-like parts. A high kV setting can improve your transfer efficiency (more powder

Both tribo and corona powder coating guns are commonly used for particle charging in the powder coating industry. Depending on the application, tribo or corona powder coating technologies have a lot of advantages and disadvantages.What is tribo powder coating?

The modern automatic powder coating booth are construced with anti-static plastic wall, which greatly prevent powder acumulation.

In electrostatic powder coating, the cause of chromatic aberration of the coating film is caused by both powder coating and powder coating process control.Considering the powder coating itself, the general powder coating production plant is formulated according to the user's requirements.

Each powder coating booth has a powder recovery system to capture and recycle overspray powder to reducing waste and keep a dustfree workshop.A complete cyclone powder recovery system includes a cyclone separator and an after-filter unit