- Home
- About Us
- Products
- Solutions
- Case Study
- Videos
- Support
- Contact Us
 |
| Quantity: | |
|---|---|
It is necessary to dry compressed air before applying to pneumatic process. The freeze dryer is to eliminate the moisture in the compressed air by lowering the temperature. It is mainly constructed with drying cabin, condensers, freezing units, vacuum pumps, heating/cooling devices, etc
| Model | COLO-5NF |
| Processing air Volume | 5m3/min |
| Inlet temperature | ≤40℃ |
| Ambient temperaure | ≤40℃ |
| Working pressure | 0.8 MPa |
| Pressure dew point | 2-10℃ |
| Air interface | G1 1/2 |
| Dimensions | 995*585*915(mm) |
| Weight | 83kgs |
It is necessary to dry compressed air before applying to pneumatic process. The freeze dryer is to eliminate the moisture in the compressed air by lowering the temperature. It is mainly constructed with drying cabin, condensers, freezing units, vacuum pumps, heating/cooling devices, etc
| Model | COLO-5NF |
| Processing air Volume | 5m3/min |
| Inlet temperature | ≤40℃ |
| Ambient temperaure | ≤40℃ |
| Working pressure | 0.8 MPa |
| Pressure dew point | 2-10℃ |
| Air interface | G1 1/2 |
| Dimensions | 995*585*915(mm) |
| Weight | 83kgs |
